Tyco CEM Systems DIU 220 Bedienungsanleitung PDF herunterladen

www.cemsys.com

OVERVIEW

The DIU 220 (PoE Door Interface Unit) combines Ethernet communications and

sufﬁcient power to support a complete door set, including an In reader, Out reader and

a standard 650mA maglock, over a single Cat5/6 cable. The DIU 220 eliminates the

need to include a power supply unit (PSU) at the door and expense of providing mains

power to the PSU.

The DIU 220 is designed primarily to provide power to a door lock, as well as local

power to a CEM reader when a high level of security is required. It has onboard

inputs which can be used to monitor conditions such as a ﬁre alarm or activated

break-glass condition.

The DIU 220 improves door security by allowing the installer to locate lock controls on

the secure side of a door, with an intelligent CEM reader on the unsecured side. The DIU

220 communicates with an intelligent CEM reader via the readers slave communication

channel. Upon a valid swipe at the card reader, the reader will instruct the DIU (over

the communications channel) to activate the appropriate output to release the lock

using a coded data signal (i.e. coded lock).

As an added beneﬁt, the DIU 220 monitors the status of all standard door monitoring

inputs; inputs on an intelligent CEM reader are free for use as general purpose inputs.

The DIU 220 is supplied in a plastic enclosure complete with PoE backplane and an

output for an additional door holder.

DIU 220

• Ethernet communications and

power via a single Cat5/6 cable

• Eliminates to need to have mains

power and a PSU at the door

• Provides local power for:

In reader

Out reader

Maglock

Sounder

Door Holder

• 11.5V @ 1.6A power output*

• Door Interface Electronics held on

one board

• Provides ‘coded lock’ interface

between door hardware and

card reader

• Fire alarm and break glass inputs

for emergency door and holder

release

• Weigand interface for 3rd party

exit reader.

• Designed for ease of installation

and maintenance using 2 part

connectors throughout

• Compliant with EN55022

(emissions) and EN55024 (access

control immunity)

* 1.6A @ 23

C or 1.4A @55

FEATURES

DIU 220

Power over Ethernet Door Interface Unit

1 2

Inhaltsverzeichnis

Seite 1 - FEATURES

www.cemsys.comOVERVIEWThe DIU 220 (PoE Door Interface Unit) combines Ethernet communications and sufﬁcient power to support a complete door set, inclu

Seite 2 - TECHNICAL SPECIFICATIONS

PHYSICALSize 160 x 160 x 90 mm (6.3 x 6.3 x 3.5in)Weight 0.75KgHousing Flame retardant polycarbonateColour Light grey with transparent lidPower

Kommentare zu diesen Handbüchern

Keine Kommentare

Tyco CEM Systems DIU 220 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Tyco CEM Systems DIU 220 herunter. Tyco CEM Systems DIU 220 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Tyco CEM Systems DIU 220