Tyco Ethernet Input Output Controller DCM 150 Bedienungsanleitung PDF herunterladen

www.cemsys.com

OVERVIEW

The DCM 150 (Door Control Module) is a low cost, two-door controller designed to

interface third-party read heads with the CEM range of access control systems.

Acting as a wiring concentrator for up to two doors it allows local door furniture and

read heads to be wired to a single point near the door and remotely connected, via

CAT5 or Belden 8723 cable, to a CEM intelligent controller such as webEntry™ or a

S9000 type controller for use on AC2000 SE. Up to sixteen units can be multi-dropped

from a single RS485 Communications line up to a distance of 1,200 Metres from the

host controller.

The DCM 150 supports most third-party access control read heads conforming to the

physical Wiegand/Mag Stripe (data/data, clock/data) interfaces covering a range of

technologies from RF Proximity to Biometric devices. Customised solutions are also

available using two high speed serial RS485/RS232 interfaces to support non-standard

devices such as biometric, read/write smartcards and crypto modules.

The DCM 150 supports two door conﬁgurations. It can either be conﬁgured for two read

heads on two separate doors, with optional Exit push buttons, or can be conﬁgured to

support an Entry/Exit conﬁguration for bi-directional control on a single door.

• Support for two doors

• Interfaces third party read

heads to CEM intelligent

controllers

• Reader communications via

standard Wiegand or Mag

Stripe interfaces

• Eight Supervised inputs

(four available per door)

• Two Relays (normally opened

or normally closed)

• Self resetting fuses – saves

maintenance time

• Onboard LED - provides visual

status

• Dedicated Tamper input

• Flash upgradeable on site

• Suitable for use with

webEntry™ and AC2000 SE

systems

FEATURES

DCM150

Ethernet Input Output Controller

DCM 150

1 2

Inhaltsverzeichnis

Seite 1 - FEATURES

www.cemsys.comOVERVIEWThe DCM 150 (Door Control Module) is a low cost, two-door controller designed tointerface third-party read heads with the CEM ra

Seite 2 - TECHNICAL SPECIFICATIONS

PHYSICALSize - Board Only 180 x 120 x 20mm (7.1” x 4.7” x 0.8”)- Enclosure 460 x 250 x 90mm (18” x 10” x 3.5”)Weight - Board Only 0.1Kg - En

Kommentare zu diesen Handbüchern

Keine Kommentare

Tyco Ethernet Input Output Controller DCM 150 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Tyco Ethernet Input Output Controller DCM 150 herunter. Tyco Ethernet Input Output Controller DCM 150 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Tyco Ethernet Input Output Controller DCM 150